General Information for Steel A570.36
| Material Group |
P - Steel |
| Sub-Grou |
Low Carbon Steel |
| Tensile Strengt |
750 [N/mm^2] |
| Machinability |
65% - 80% |
Equivalent International Designations for Steel A570.36
| Standard |
Name |
| SAE |
A570 36 |
| WNR |
1.0038 |
| DIN |
RSt37.2 |
| BS |
4360 40 C |
| SS |
1311 |
| ANFOR |
E24.2Ne |
Chemical Composition for Steel A570.36
Sorry, Not Availble for this Material
Cutting Speeds Recomendations for Non-alloyed steel 0.1-0.25% Carbon
| Application |
Vc (m/min) |
Vc (SFM) |
| Turning |
285-350 |
930-1150 |
| Milling |
175-220 |
570-720 |
| Parting |
135-170 |
440-560 |
| Grooving |
160-195 |
520-640 |
| Drilling |
115-140 |
380-460 |
Important! The speed estimation is given for an ideal situation:
- Most suitable carbide grade
- Stable tool clamping
- Stableworkpiece clamping
- Goodqualityraw material
- Ashort overhangof the cutting tool.
- Nominalhardnessof the material.
- etc.
Recommended Carbide Grades for Steel A570.36
Grade for Milling (Indexable)
Recommended Insert Cutting Edge Geometry for Steel A570.36
| Honing Siz |
0.05-0.08 mm / 0.002-0.003" |
| Rake Angl |
11° -13° |
| Land Angl |
Positive |
| Land Widt |
0.20-0.30 mm / 0.008-0.012" |
