General Information for Steel P20+S
Material Group |
P - Steel |
Sub-Group |
Tool Steel |
Tensile Strength |
790 [N/mm^2] |
Machinability Range |
23% - 55% |
Equivalent International Designations for Steel P20+S
Standard |
Name |
SAE |
P20+S |
WNR |
1.2312 |
DIN |
40CrMnMoS86 |
BS |
P20+S |
ANFOR |
40CMD8+S |
Chemical Composition for Steel P20+S
Sorry, Not Availble for this Material
Cutting Speeds Recomendations for Tool Steel and High Alloy Steel
Application |
mm/min |
SFM |
Turning |
100-240 |
330-790 |
Milling |
65-150 |
210-490 |
Parting |
50-115 |
160-380 |
Grooving |
55-135 |
180-440 |
Drilling |
40-95 |
130-310 |
Important! The speed estimation is given for an ideal situation:
- Most suitable CARBIDE grade
- Stable tool clamping
- Stable workpiece clamping
- Good quality raw material
- A short overhang of the cutting tool.
- Nominal hardness of the material.
- etc.
Recommended CARBIDE Grades for Steel P20+S
Grade for Milling (Indexable)
Recommended Insert Cutting Edge Geometry for Steel 1006
Honing Size |
0.05-0.08 mm / 0.002-0.003" |
Rake Angle |
11° -13° |
Land Angle |
Positive |
Land Width |
0.20-0.30 mm / 0.008-0.012" |